2

Furniture

Make your own furniture in 1:12 scale.

All furniture can be painted in the colours of your choice to match the colours of your dolss house.

!
3-10 dagen
KM27

Rustic Table

A laser-cut kit to make a large rustic table. The top has already laser-cut " shelves. To make deeper groves, use sharp object. This table can be used as a kitchen table, a large side table or garden table, or...well a lot of possibilities. Size: 180 mm length x 80 mm width x 75 mm height
3-10 dagen
KM33

Large Cabinet

A very special (large) cabinet large bar with lots of possibilities (think of a restaurant, kitchen, store, bathroom, anyway, for this cabinet you can find a place everywhere). Nice about this cabinet is that it looks very complicated, however, due to our new techniques, it is not so very difficult to make this kit There's a very clear step-by-step photo instructions and step-by-step written instructions are in English, Dutch and German. The kit includes handles and mirror. All the doors can be opened and closed (without the use of hinges!). The lamp  (not included in the kit), shown in the photo's, is specially designed by Ray Storey for this cabinet. If you want to have the same lamp as we did use, you can order this lamp in by Ray Storey. Of course you can choose to have no lights in the cabinet! Size cabinet: 26 cm wide x 4 cm deep x 22 cm high.
3-10 dagen
KM42

Side Table

3-10 dagen
KM35

Side Table

An easy to make kit of a gorgeous side table (linden wood) with elegant legs. At the front side of the table are nice round corners. Size: 160 mm long x 75 mm high x 48 mm deep. Instructions in Dutch, English and German, complete with step-by-step photos.
3-10 dagen
KM34

French Side Table

Another addition to the French Castle Series: a side table. An easy to make kit in just 5 steps! Instructions in Dutch, English and German, complete with step-by-step photos. Size: 115 mm wide x 35 mm deep x 62 mm high. When you look at the photos of the flower shop, you can see that we have put one table to a wall inside the shop and at the exact position one table towards the same wall but on the outside. The result is a very special effect.
3-10 dagen
KM22

Large Christmas Cabinet

A laser cut kit for creating a gorgeous cabinet with 6 drawers. Graphics on the front, sides and drawers. Easy to follow instrucutions in English complete with step-by-step photos. An easy to make kit with a great result! Dimensions: 20.5 cm wide, 22.8 cm high and 4 cm deep.
3-10 dagen
KKM8

Cot Kit

A kit for making a cot. The bottom is adjustable: suitable for a baby or toddler. Clear graphics, easy to follow instructions in english, complete with step-by-step photos. More photo's to see by clicking on the picture. Click on this link and you can see more photo's from the baby room.
3-10 dagen
KKM9

Dresser Kit

A kit for making a beautiful dresser. The five drawers can be opened. The knobs are of high quality metal. Crispy clear graphics. Clear instruction in English with step-by-step photos. More phto's to see by clicking on the photo. Click on this link for the photo's of the nursery.
3-10 dagen
KKM10

Wardrobe Kit

This kit is not suitable for the beginner. Wardrobe kit with 2 wide drawers that can be opened. The knobs and hinges are made ​​of high quality metal. With this kit you can choose from two different types of graphics for the doors (you can see the other graphics by clicking on the link to the photo's of the nursery). Clear instruction in English with step-by-step photographs. Click on this link for pictures of the nursery.
3-10 dagen
KM15

Children's Bench Kit

A laser-cut kit of a children's bench. The two drawers can be opened.
3-10 dagen
AOMKM19

French Writing Desk Kit

An easy to make, laser-cut kit for making a French writing desk with an unusual design. Size: 95 mm wide, 120 mm high, 60 mm deep. Incl. step-by-step instructions in English, complete with photo's.
3-10 dagen
KM4

Cradle Kit

A laser-cut kit for making a special cradle. Easy to follow instructions, complete with step-by-step photos. See multiple photos. All other accessories shown in the pictures are not included in the kit.
3-10 dagen
KM 18

French Castle Series: French Cabinet Kit

An addition to the French Castle Series: an easy to make, laser cut kit of a charming French cabinet. Easy to follow instructions with step-by-step photos. Instructions in English. No hinges will be used in this kit, but still the doors are easy to open and to close. Dimensions: 97 mm high x 42 mm deep x 120 mm wide.
3-10 dagen
AOMKM14

Stepping Stool Kit

An easy to make, laser-cut kit with instructions in English. Size: 30 x 35 x 40 mm height.
3-10 dagen
AOMKM13

Small Stool

A laser-cut kit for making a little stool. Great for decorating, or just for using it as a step stool or as a footstool, or....well, there are so many possibilities!. An easy to make kit. Instructions in English. All accessories, shown in the pictures, are not included. Height: 20 mm, Width: 45 mm, Depth: 22mm
3-10 dagen
AOMKM16

Buffet Unit

An easy to make, laser cut kit for creating an open buffet unit or china cabinet with a great look. Of course you can  give this unit / cabinet any possibility of application you want. The "shelfs" in the back side have been lasered. Height: 110 mm, Width: 74 mm, Depth: 40 mm. Instructions in English.
All accessories shown in the picture, are not included in this kit.
3-10 dagen
AOMKM12

Small Cabinet Kit

Een laser gesneden kit om een klein kastje voor talloze doeleinden te maken. U kunt bijvoorbeeld dit kastje als nachtkastje gebruiken, maar ook als schoenenkastje, boekenkastje en ga zo maar door. Mogelijkheden te over! Afm: 78 x 50 x 30 mm.
3-10 dagen
JWMKM1

Clothing Rack Kit KM1

A precision laser cut kit for making a clothing rack (with matching dusty pink graphics). Height: 13,5 cm, Wide top shelf: 11,5 cm, depth top shelf: 4,5 cm. Instructions in English, Dutch and German, complete with step-by-step photo's. Clothes hangers you will find, by clicking onto this link.
3-10 dagen
JWMKM2

Clothing Rack Kit KM2

A precision laser cut kit for making a clothing rack (with matching old dusty blue graphics). Height: 13,5 cm, Wide top shelf: 11,5 cm, depth top shelf: 4,5 cm. Instructions in English, Dutch and German, complete with step-by-step photo's. Clothes hangers you will find, by clicking onto this link.
3-10 dagen
JWMKM3

Clothing Rack Kit KM3

A precision laser cut kit for making a clothing rack (with matching light dusty pink-ivory graphics). Height: 13,5 cm, Wide top shelf: 11,5 cm, depth top shelf: 4,5 cm. Instructions in English, Dutch and German, complete with step-by-step photo's. Clothes hangers you will find, by clicking onto this link.
3-10 dagen
JWMKK4

Small Dolls House Kit

A precision laser cut kit to make a small dollhouse. The house has three floors and numerous uses. It is perfect for the 1:144 scale, but you can also let your imagination go and use it for instance as a shoes-, linen-, books-, toy cabinet and so on. So many possibilities! By clicking on the photo you can see a few examples. Height (incl. chimney): 13.3cm x roof width: 6 cm x  depth: 3 cm. Including a clear instructions in Dutch, English and German. The instructions is completed with step-by-step photos. Accessoiries, shown on the photo's, are not included.
3-10 dagen
JWMKK5

Small Dolls House Kit Old Dusty Blue

A precision laser cut kit to make a small dollhouse. Enclosed there is a graphic to make a house as shown on the photo's. Of course you have to paint the roof yourself! The house has three floors and numerous uses. Let your imagination go and use it for instance as a shoe-, linen-, books-, baby or toy cabinet. So many possibilities! By clicking on the photo you can see more pictures. Height (incl. chimney): 13.3cm x roof width: 6 cm x  depth: 3 cm. Including a clear instructions in Dutch, English and German. The instructions is completed with step-by-step photos. Accessories as shown on some of the photo's, are not included.
3-10 dagen
JWMKK6

Small Dolls House Kit Light Pink-Ivory

A precision laser cut kit to make a small dollhouse. Enclosed there is a graphic to make a house as shown on the photo's. Of course you have to paint the roof yourself! The house has three floors and numerous uses. Let your imagination go and use it for instance as a shoe-, linen-, books-, baby or toy cabinet. So many possibilities! By clicking on the photo you can see more pictures. Height (incl. chimney): 13.3cm x roof width: 6 cm x  depth: 3 cm. Including a clear instructions in Dutch, English and German. The instructions is completed with step-by-step photos. Accessories as shown on some of the photo's, are not included.
3-10 dagen
JWMKK7

Small Dolls House Kit Dusty Rose

A precision laser cut kit to make a small dollhouse. Enclosed there is a graphic to make a house as shown on the photo's. Of course you have to paint the roof yourself! The house has three floors and numerous uses. Let your imagination go and use it for instance as a shoe-, linen-, books-, baby or toy cabinet. So many possibilities! By clicking on the photo you can see more pictures. Height (incl. chimney): 13.3cm x roof width: 6 cm x  depth: 3 cm. Including a clear instructions in Dutch, English and German. The instructions is completed with step-by-step photos. Accessories as shown on some of the photo's, are not included.
3-10 dagen
KMCB2403

Arrowback Rockingchair

This kit contains an accurate replica of a arrowback rocking chair. The Chrysnbon kits are highly detailed and still very easy to assemble. Instructions in English.